Marine Diesel Engines and Generators

Speak to an expert 02 9319 5222

Nanni Marine Diesel Engine N4.80

79 hp

Kubota engine base

Designed for sailing yachts as well as sport fishing boats, the N4.80 is a 4 cylinder diesel engine with direct fuel injection. It benefits from the experience of the Nanni Diesel engineering team in terms of marinization and from the latest technological developments by Kubota for their industrial engine bases.

E-CDIS injection system

The E-CDIS direct injection system equipping the N4.80 is characterized by an injector positioning in the centre of the 4 valves per cylinder. This technology results in considerable reduction of particulate emission. Its low rated rpm of 2800rpm associated with the direct injection offers you ease of use and important fuel efficiency.

Compact and comfortable

The reduced dimensions of the N4.80 engine allows it to be installed in the smallest engine compartments. The large choice of straight or angle down gearboxes, either mechanical or hydraulic, as well as a Sail Drive transmission allows you to fully utilize the significant torque of this engine by perfectly adapting it to your specific vessel. As a result of its 2.5 liter cylinder capacity and the characteristics of its turbocharger, the N4.80 develops high torque at low rpm. The take-off is faster and cruising speeds are reached at lower rpm levels. Its two balancing shafts driven by a gearwheel distribution bring robustness and reliability to the engine, while easing its maintenance.

Protecting the environment

The N4.80 complies with the most stringent emission regulations in the world: EPA marine Tier 3, RCD2013/53/EU, BSO2

Technical Specifications

  • Engine Base: Kubota
  • Rated Power (kW/HP): 57.4 / 79
  • Rated RPM: 2700
  • Displacement (cm³/in³): 2434 / 148.5
  • Number of Cyliners: 4 in line
  • Bore and Stroke (mm/in): 87 x 102.4 / 3.43 x 4.03
  • Compression Ratio: 23:1
  • Intake: Turbocharged

Engine Specifications

  • Dry Weight with Transmission (kg/lb): 241 / 531.31
  • Maximum Install Angle: 7° (dynamic)
  • Exhaust Hose Diameter (mm/in): 75 / 3
  • Fuel Hose Diameter (mm/in): 8 / 0.31
  • Sea Water Hose Diameter (mm/in): 32 / 1.25
  • Transmission: Mechanical Shaft, Hydraulic Shaft
  • Cooling: Closed with Heat Exchanger
  • Certifications: EPA, BSO, SAV, EU-RCD

Standard Equipment

  • Fresh Water Cooled Exhaust Manifold
  • Exhaust Elbow
  • 4m Electrical Extension Harness
  • Fuel Filter
  • Oil Filter
  • Mecanical Gearbox
  • Sea Water Pump

Optional Equipment

  • Keel Cooling Adaptation
  • Complete Propulsion Kit
  • Thottle and Shift Controls
  • Flybridge Panel and Extension Harness
  • Bi-Pole Electrical System
  • Water Boiler System
  • Complete Fuel System
  • Complete Exhaust System