Current N4.60
Part Numbers
Part Description | Part Numbers |
Oil Filter | 603003 |
Fuel Filter | 310302 |
Impeller | 544310 |
Gasket, Impeller | 614616 |
Seal, W/Pump | 614516 |
V Belt | 48108134 |
O-Ring, Heat Exchanger |
|
Anode, Exhaust Elbow | 494635 |
Anode, Selva Sail Drive | 312810 |
Periodic Maintenance
| CHECK | EVERY DAY | AT 20 HRS | 100 HRS | 200 HRS OR EVERY YEAR | 400 HRS OR EVERY 2 YRS |
Oil Levels (Engine & Gearbox) | x | ||||
Battery Charge (indicator) | x | ||||
Water Temperature & Operation | x | ||||
General Sealing | x | ||||
Battery Electrolyte level | x | ||||
Operation of the Controls | x | ||||
Belt Tension | x | x | |||
Valve Adjustment | x | x | |||
Starter & Alternator Mountings | x | ||||
Tightness of Screws and Assemblies | x | x | |||
Sea Water Pump | x | ||||
Engine Mounts and Alignment | x | ||||
Injector Calibration | x | ||||
Sea Water Strainer | x | ||||
Thermostat (to be cleaned) | x | ||||
Coolant level in Heat Exchanger | x | ||||
Zinc Anode | x | ||||
Air Filter | x | ||||
CLEAN | |||||
Heat Exchanger Tube Stack | x | ||||
REPLACE | |||||
Oil Filter | x | x | |||
Fuel Filter | x | ||||
Oil (Engine & Gearbox) | x | x | |||
Coolant | x | x | |||
Primary Fuel Filter | x | ||||
O-Rings, Heat Exchanger | x | x | |||
Impeller | x | ||||
V Belt | x |
Technical Data
ENGINE SPECIFICATION
Number of cylinders: 4
Displacement: 1999 cc
Bore - Stroke: 83 X 92.4 mm
Compression ratio: 22/1
Max. Pressure difference between cyl. :
10%
Compression pressure: 25.5 bars
Maximum speed without load: 3050 rpm
Maximum RPM in load: 2800 rpm
Idle RPM in forward gear: 800 rpm
Max. Torque: 168 Nm at 1800 rpm
Firing order: 1 - 3 - 4 - 2
Rotation: Anti clockwise (Flywheel)
INJECTION
Type of injector: BOSCH
Fuel injection pressure: BOSCH PFR5M
Injection pump manufacturer: 140 bars
Injection timing: 19°
TURBOCHARGER
Boost pressure: 0,55 to 0,60 bar
Exhaust gas temperature: 450° to 500°
Axial shaft clearance: 0.12 mm maxi
TIGHTENING TORQUE
Arm head cover cap nuts: 0.7 to 0.9 Nm
Cylinder head bolts: 9.5 to 10.0 Nm
Flywheel bolts: 10.0 to 11.0 Nm
Connecting rod bolts: 4.5 to 5.0 Nm
Rocker arm bracket nuts: 2.4 to 2.8 Nm
Main bearing caps bolts:
M8: 4.7 Nm
M10: 7.0 to 7.5 Nm
Nozzle holder assembly: 5.0 to7.0 Nm
Glow plugs: 2.0 to 2.5 Nm
LUBRIFICATION
Oil pressure at idle RPM: 1 bar
Oil pressure at maximum load:
3 to 4.5 bars
Recommended oil: API CE SF/CD
Oil pan capacity: 9 litres <angle> 10 litres
Gear box:
Capacity: depending the type
Oil recommended:
COOLING SYSTEM
Capacity: 9 liters
Liquid 50% antifreeze + 50% water
DIAGRAMS
Valve clearance (cold):
Inlet: 0.20 mm
Exhaust: 0.20 mm
Valve recessing: 0.40 mm
PISTON RINGS
Piston ring gap:
Piston top compression: 0.30 to 0.45 mm
Intermediate: 0.30 to 0.45 mm
Oil control: 0.25 to 0.45 mm
CYLINDER HEAD
Cylinder head surface flatness:
<0.05 mm / 500 mm
SEA WATER PUMP
Water flow: 90 to 100 Liters per hour.
GLOW PLUGS
Resistance: = 1.0 ohm
Previous page: Current N4.50
Next page: Current N4.85