N1.7
7hp
Specifications
Base: FERRYMAN
Max power: 7 HP (5,2 Kw)
RPM at max output: 3600 rpm
Displacement: 290 cc
Number of cylinders: 1
Bore / stroke: 82 x 55 mm (3,22" x 2,19")
Compression ratio: 20 / 1
Max Torque: 15.3 Nm
Cooling: Sea Water
Alternator: 12 V / 14 A.
Inst. panel: Eco 3
Gearbox: ZF10, 2R.
Weight (incl. Gearbox): 64 Kg
Diameters
Exhaust: 40 mm ( 3,15")
Fuel pipe: 8 mm ( 0,31")
Seawater intake: 20 mm
Installation angle: 15'
Standard Equipment
Coming Soon
Coming Soon
Coming Soon
Technical Information
Single cylinder four stroke diesel engine, water cooled with direct injection system, save manual start with starting handle or electric starter motor, alternator in flywheel house, excess fuel device, automatic decom-decompression, self-venting fuel system, mechanical speed governor, lubricating oil gear pump, oil filter, intake silencer or dry type air cleaner, fuel filter, water cooled exhaust elbow, cooling water pump, cooling water thermostat, crankcase of high tensile light alloy, crankshaft / con rod bearing: plain bearings on all except flywheel end (roller bearing), cast integral engine feet, power take of flywheel end, environmentally friendly by using internal crankcase breathing and valve stem seals.
Standard scope of supply
Intake silencer, fuel lift pump, fuel filter, electric starter motor, alternator, solenoid valve (normally open), deep oil sump (max. inclination 20°), oil pressure switch, cooling water pump, cooling water thermostat, cooling water temperature switch, gearbox ZF 10M, base frame with flexible engine mounts, crank handle (rigid), operator`s manuals for engine and gearbox..
FN-ISO
Blocked power output for intermittent loads.
Derating
Derating 1% approx. every 100 m altitude and 2% approx. every 5°C above 20°C. Ratings certified within tolerance of 5% after running-in and operation with muffler and standard air cleaner.
Previous page: Shaft Drive
Next page: N2.10